10
8 Memory function
The measurements for each day (steps, distance walked,
calories burned and fat burned) are automatically stored in
memory and reset to 0 at midnight (0:00) each day.
8.1 Recall data
1
Press to select the type of display you want to see.
2
Press to view the measurement results.
The display changes with each press of as shown
below.
• Keep pressed to automatically change the display until the
current display is displayed.
• Press to return to the current display.
Notes:
• You cannot use the memory function when using the activity mode
(refer to Chapter 6.4).
• If no buttons are pressed for more than 1 minute, the display
returns to the current display.
Activity mode
memory
memory for 1 to 7
days ago
Current display
HJ-203-E_A_M.book 10 ページ ２０１１年１２月１９日 月曜日 午後３時４０分
To Next Page
Loading...
