EasyManua.ls Logo

on networks N300RE User Manual

on networks N300RE
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
350 East Plumeria Drive
San Jose, CA 95134
USA
April 2013
202-11247-01
v1.0
Easy, Reliable & Secure
N300RE WiFi Range
Extender
User Manual

Other manuals for on networks N300RE

Question and Answer IconNeed help?

Do you have a question about the on networks N300RE and is the answer not in the manual?

on networks N300RE Specifications

General IconGeneral
Type-
Maximum transfer distance- m
Windows operating systems supportedYes
Product colorWhite
Bandwidth2.4 GHz
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithmsWPS
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)300 Mbit/s
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Depth45 mm
Width74 mm
Height112 mm
Weight245 g

Summary

Getting Started

Hardware Features

Overview of the extender's physical components and indicators.

How the Extender Works

Explains the extender's function as a bridge between networks.

When to Use Your Extender

Guidance on optimal locations and scenarios for using the extender.

Position Your Extender

Recommendations for placing the extender for best performance.

Ethernet Port Connection

Instructions for connecting wired devices using the Ethernet port.

Log In to the Extender

Steps to access the extender's web interface for configuration.

Status Screen

Details on the information presented on the extender's status screen.

Use EZ Setup after Installation

Guide to the simplified setup process for connecting to a wireless network.

Extender Network Settings

Connect to Existing Network

Steps to connect the extender to your home WiFi network.

Use WPS to Join Wireless Network

Instructions for using WPS to connect the extender wirelessly.

Wireless Settings

How to set up the extender's wireless network name and security options.

Set Up WPA, WPA2, or WPA + WPA2

Configuration for WPA and WPA2 wireless security protocols.

Set Up WEP

Configuration for WEP wireless security protocol.

IP Address Setup

Options for dynamic or static IP address assignment for the extender.

Attached Devices

How to see a list of devices connected to the extender.

Back Up Configuration

Procedure for saving extender configuration settings to a file.

Restore Configuration

Procedure for loading previously saved extender configuration settings.

Erase Configuration Settings

How to reset the extender to its factory default settings.

Set the Password

Steps to change the extender's administrator password.

Password Recovery

How to enable and use password recovery for the admin account.

Upgrade the Firmware

Guide to checking for and installing new firmware for the extender.

Advanced Wireless Settings

Options for fine-tuning advanced wireless parameters and features.

Set up a Wireless Access List by MAC Address

How to control device access using MAC addresses for network security.

Supplemental Information

Factory Settings

Details on the extender's default configuration parameters.

Technical Specifications

Physical, electrical, and environmental specifications of the extender.

Notification of Compliance

Regulatory Compliance Information

General compliance requirements for operating radio devices.

Europe – EU Declaration of Conformity

Details on compliance with relevant European Union directives.

FCC Requirements for Operation in the United States

FCC rules and guidelines for operating the device in the US market.

FCC Radio Frequency Interference Warnings & Instructions

Warnings and instructions related to FCC RF interference compliance.

FCC Caution

Important cautions regarding FCC compliance and unauthorized modifications.

Canadian Radio Interference Regulations

Compliance with Canadian digital apparatus and radio interference rules.

Industry Canada

Compliance with Industry Canada regulations for radio devices.

IMPORTANT NOTE: Radiation Exposure Statement

Statement on IC radiation exposure limits and installation requirements.

Interference Reduction Table

Recommended distances from household appliances to minimize interference.