Onan E125V - Page 15

-"--
DESCRIPTION
ROCKER ARM
Rocker Arm Inside Diameter
Rocker Arm Shaft O.D.
Rocker Arm to Shaft Clearance
-__.__I-
LUBRICATING SYSTEM
Engine Oil Pressure
At Idling
At 3300 rpm
Rotor Lobe Clearance
Outer Rotor to Pump
Body Clearance
Rotor and Cover Clearance
IGNITION SYSTEM
Spark Plug Gap
Ignition Timing (BTDC) Not Adjustable
Ignition Unit Core to Rotor Magnet
Clearance (Air Gap)
ELECTRICAL SYSTEM
Commutator O.D.
Difference of Commutator O.D.'s
_--
Armature's Shaft to Bushing Clearance
Mica Undercut
BALANCE SHAFT
End Clearance (Both Shafts).
AND
CLEARANCES
FACTORY SPECIFICATION
MIN MAX
-_I___-__
12.000
12.018
(0.4724) (0.471 8)
11.973 11.984
(0.4714
(0.471 8)
0.016
0.045
(0.0006) (0.001 8)
-I_----*
3.0 psi or more
14.0 psi or more
0.15 or
less
( 0.006 or less)
0.12 0.19
(0.005) (0.007)
0.02
0.09
(0.001) (0.004)
0.89 0.89 1.02
(0.035)
(0.035) (0.040)
23"
0.50
(0.020)
28.0)
Less than' 0.05
(Less than 0.002)
0.02 0.07
(0.001) (0.003)
(1.102)
0.45
0.75
(0.01 8) (0.030)
0.10
0.20
(0.004) (0.008)
3-6
ALLOWABLE
0.15
(0.0059)
4.0 psi
0.20
(0.008)
0.25
(0.010)
27.00
(1.063)
0.016
(0.41)
0.20
(.008)
0.20
(0.008)
0.25
(0.01 0)