Onda V-10 PLUS - Important Guidelines; General Operating; Select Application; Set Wavelength

7
Important Guidelines
 Reagents and dilution buffers can cause cauterization and other damage to health.
 Samples (nucleic acids, proteins, bacteria cultures) can be infectious and cause serious
damage to health.
 During sample preparation, measuring procedures and maintenance and cleaning work,
observe all local laboratory safety precautions (e.g. wear protective clothing and gloves,
use of disinfectant) regarding the handling of sample material.
 Dispose of measuring solutions and cleaning and disinfectant materials in accordance with
the relevant local laboratory regulations.
General Operating
Select Application
Main interface, press the key
SELECT
(left) to enter into.
Set Wavelength
Test interface, press key
GOTO λ
to set wavelength,
▲
,
▲
to modify wavelength value,
then press key
SELECT
(left) to go to wavelength and blank.
WL: 500. 0nm
Pl ease ent er WL. :
500. 0 nm
OK
Set Parameters
Press
SET
enter into setup interface,
▲
,
▲
to select items or input parameters,
SELECT
(left) to confirm.
Delete the test result and stored data
Test Interface, press the key
PRINT
, then press key
▲
,
▲
to select “Clear Data, not
Print ”,
SELECT
(left) to delete.