Setting Up Your CD Player
To set up the ONE FOR ALL 4 for your CD Player:
Find your CD Player code in
the Set-Up Code section
(starting on page 23). Codes
are listed by brand name. The
most popular code is listed
first. Switch on your CD
Player and insert a CD.
Press and release the ONE
FOR ALL 4’s
CD key, then
press and hold down the
MAGIC key
until the ONE
FOR ALL 4’s red light blinks
once and then twice.
Enter your
three-digit CD
Player code
using the number
keys. The red light will blink
twice.
Now, aim the ONE FOR
ALL 4 at your CD Player and
press
PLAY. If your CD Player
starts playing the CD, your
ONE FOR ALL 4 is ready to
run your CD Player.
Write your code in the three boxes on page 22, for easy
future reference.
To control your CD Player, press the CD key first.
If your CD Player does not respond, follow steps 1 through
4 with each code listed for your brand. If none of the codes
listed for your brand operate your CD Player, then try the
search method described on page 11, even if your brand
isn’t listed at all.
■ ■ ■ ■
■ ■ ■ ■
10
1
2
3
4
To Next Page
Loading...
Need help?
General
