One for All 4 User Manual

Getting Codes from the
ONE FOR ALL 4
Even if you have used the Search Method, it is handy to
know your Television, Video, Satellite Receiver, Cable
Converter or CD Player code for future reference. It’s easy
to get your code after you have set up your device.
To get your Television code:
Press
TV.
Press and hold down MAGIC
until the ONE FOR ALL 4’s
red light blinks once and then
twice. Press
9 9 0. The red light
will blink twice.
For the first digit of your three-
digit code, press
1 and count
the red blinks. If there are no
blinks, the digit is “0”.
For the second digit, press
2
and count the red blinks.
For the third digit, press
3 and
count the red blinks. Now you
have your three-digit code.
Make sure you write your Television code in the three
boxes on page 22.
To get the code for your other devices follow steps 1
through 5, only substitute the appropriate device key
(VCR, SAT or CD) during step 1. Write the code for your
device(s) in the three boxes on page 22, for easy future
reference.
■ ■ ■ ■
■ ■ ■ ■
12
1
2
3
4
5
TV
11
11
22
22
33
33
All manuals and user guides at all-guides.com

One for All 4 Specifications

General

Device Type	Universal Remote
Number of Devices Controlled	4
Batteries Required	Yes
Battery Type	AAA
Brand	One for All
Compatibility	TV, DVD, Blu-ray
Setup Method	SimpleSet