KEY INDEX (continued)
CD Player Functions
Press CD once to control your CD player.
Press POWER once to turn on or off the
selected device (e.g, CD).
Use GUIDE to display your CD player’s
program guide.
Use INFO to display the CD player’s current
channel and program information.
Use SELECT to select a compact disc. Use ▲
(or ▼) to select the next (or previous) CD.
Use (or ) to select the next (or previous)
track.
Use VOL+ (or VOL-) to raise (or lower) the
CD player’s audio volume (if applicable).
Press MUTE once to turn the CD player’s
audio off or on (if applicable).
Use the keypad (1 ~ 9 and 0) to
directly select tracks. If the original
remote control required pressing an
Enter key to select a track, also press
the ENTER key after the track number
(e.g., 1-2 -ENTER).
Use the transport keys to control
your CD player.
After programming, press M1 ~ M3 once to
run a desired macro (see Using Macros on
page 34).
After programming, press L1 ~ L4
once to activate a learned function.
See Using Learning on page 29.
▲
▲
49
To Next Page
Loading...
