One Link DVR - Miscellaneous Setup - Image Parameters; Miscellaneous Setup - Password Enable

User Manual
11
5.14 Miscellaneous Setup –Audio Port Setup
5.15 Miscellaneous Setup – Image Parameters
5.16 Miscellaneous Setup – Password Enable
You can adjust the image parameters to meet your
needs. The controls are shown below:
CON：Contrast
BRI： Brightness
HUE：Hue (color)
SAT：Saturation (color)
Press [▲] or[▼] buttons to select the item, and
press [ ] or [ ] buttons to adjust the setting.
AUDIO PORT SETUP
AUDIO PORT 1 – VIDEO CHANNEL ［ 1 ］
AUDIO PORT 1 –RECORD ［OFF］
( ) MOVE (SEL)SELECT (MENU)EXIT
When you move the cursor to “AUDIO PORT RECORD” and press the “SELECT” button, the option
will be changed to ON or OFF. If the option is ON, the audio will be recorded onto the hard drive when
you press the RECORD button.
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL)SELECT (MENU)EXIT
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]
When Password Enable is set to “on”, the
password will be required and must be entered
correctly; otherwise, you will not be able to enter the
system.
Entering the password will not be required if the
Password Enable is set to “off” (except of formatting
hard drive and menu reset）
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL)SELECT (MENU)EXIT
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]
When you move the cursor to “AUDIO PORT
VIDEO CHANNEL” and press the “SELECT” button,
the option will be changed to “CH2”. If you push
“SELECT” button one more time the option will be
changed to “CH3” and one more time will set the
channel to “CH4”.