TWIN USER’S MANUAL
7
02
Packing List
2.8. qi charger For the wireLeSS controLLer
Qi inductive technology charger that
simplifies the charging process by just
setting your controller down on the
charging pad. Input: 5 V - 2 A, Output: 5 V - 1
A.
2.9. Stator+nozzLe
• Custom designed and CNC machined
out of high strength and corrosion
resistant tempered aluminum.
• Parts are hard anodized and xed joint
2.10. iMPeLLer
• 63.7 mm diameter. Custom designed
and CNC machined out of high strength
and corrosion resistant tempered
aluminum.
• Hard anodized, providing extra
corrosion resistance and an increased
surface hardness.
2.11. handLe
Made of highly durable thermoplastic
rubber, end webbing is doubled and
stitched for extra strength and security.
2.12. tooLing kit
• Contains conventional manual tools.
• Screw set and custom made tools necessary for
impeller extraction/insertion.
• All high strength and corrosion resistant.
• Ex. Impeller extractor tooling.
2.13. trigger
Ideal to minimize the effort of pressing the drop.
Just place the drop inside the trigger and press on it.
Easy to install, easy to remove.
2.14. FootStraPS
Pre-formed arch prevents collapsing. 7 mm
neoprene padding. Internal adjustment system.
Twist control system.
2.15. LeaSh + Security key
7-Feet Coiled leash. Padded neoprene cu. Stainless
steel swivels to stop tangles. Custom made security
magnet pull system.
2.16. uS box FinS
Hard plastic and bre 6,5 inch Us Box ns.
To Next Page
Loading...
