Onean TWIN - First Assembly: Battery and Footstraps; Insert the Battery Magnet; Insert Female Connectors; Positioning the Footstraps

TWIN USER’S MANUAL
9
03
First Assembly
3.3. inSert the battery Magnet
Before using the unit for the first time, the cylindrical magnet must be
inserted in the hole inside the battery compartment. A sticker is provided
inside the magnet’s plastic bag that must be placed after inserting the
magnet. The entire space must be covered to avoid water inside the magnet
compartment.
3.4 inSert FeMaLe conectorS
Please, screw the female connectors, found in the wireless controller case,
in the holes of the bottom part of the battery using the tool provided on the
tooling kit.
3.5. PoSitioning the FootStraPS
The board incorporates inserts valid for both goofy and regular riders.
1. Depending on the style of riding, place the footstraps over the desired
inserts. One on the front of the board and one on the back.
2. Place the screw through the screw insert and hold the footstrap.
3. Align the holes with the footstrap insert.
4. Screw the footstrap to secure it.
Female connectors
Battery bottom
Footstraps
inserts
Footstrap insert
Footstrap screw
Screw
insert
MAGNET
STICKER
Insert the magnet
and place the sticker
above it.
Battery magnet
Battery
compartment
TWIN