Onean TWIN - First Assembly: Fins and Leash; Insert the Fins; Install the Leash

TWIN USER’S MANUAL
8
03
First Assembly
3. FirSt aSSeMbLy
3.1. inSert the FinS
1. Insert the fin inside the finbox as
shown in the picture.
2. Insert the metallic square in the nbox
and move it until it alignes the screw.
3. Fix the screw attaching the fin to the
board.
3.2. inStaLL the LeaSh
1. Insert the screw through the insert and hold the leash.
2. Align the holes with the leash insert located on the left hand lower side of
the board on the non-slippery surface.
3. Screw the piece to secure it.
Leash insert
Leash insert
Leash screw
Screw insert
TWIN