Setting up your system
7
6. Confirm your settings
OK will be highlighted near the bottom of
the screen. If your settings are correct,
press to confirm and save the settings
and return to the MAIN MENU.
If you want to cancel your settings and start the settings process over
again, press or to highlight CHANGE and press . You will be
returned to the LANGUAGE screen.
WARNING: The unit of measure mg/dL must be displayed
here. If your display shows mmol/L rather than mg/dL, contact
Customer Service. You cannot change the unit of measure. Use
of the wrong unit of measure may cause you to misinterpret your
blood glucose level, and may lead to incorrect treatment.
To Next Page
Loading...
