OneTouch Select User Manual

Starting the test process
Have these things ready when you test your
blood glucose level:
• OneTouch
®
Select
™
Meter
• OneTouch
®
Select
™
Test Strips
(sold separately)
• Lancing device
• Sterile lancets with protective disks
NOTE:
• Use only OneTouch
®
Select
™
Test Strips with
your OneTouch
®
Select
™
Meter.
• Make sure your meter and test strips are
about the same temperature before you test.
• Testing must be done within the operating
temperature range (50–111°F). For the most
accurate results, try to test as close to room
temperature (68–77°F) as you can.
• OneTouch
®
Select
™
Test Strips are for single
use only. Never re-use a test strip that had
either blood or control solution applied to it.

CAUTION: The
test strip vial contains
drying agents that
are harmful if inhaled
or swallowed and
may cause skin or
eye irritation.
 CAUTION: If you
cannot test due to
a problem with your
testing supplies,
contact your health
care professional or
Customer Service.
Failure to test could
delay treatment
decisions and lead
to a serious medical
condition.
8

OneTouch Select Specifications

General

Test Time	5 seconds
Sample Size	1 µL
Coding	No coding required
Measurement Range	20 to 600 mg/dL
Automatic Shutoff	2 minutes after last action
Operating Conditions	10 to 90% relative humidity