26
Applying blood and reading results
Gently touch the channel to the edge of the blood drop.
Be careful not to push the test strip against your
fingertip or the test strip may not fill completely.
NOTE:
• Do Not smear or scrape the drop of blood with the test strip.
• Do Not apply more blood to the test strip after you have moved
the drop of blood away.
• Do Not move the test strip in the meter during a test.
CAUTION: You may get an ERROR 5 message or an inaccurate result
if the blood sample does not fill the confirmation window completely.
See page 56. Discard the test strip and re-start the test process.
To Next Page
Loading...
