3. Wait for the confirmation window to fill completely
The blood drop will be drawn into the
narrow channel and the confirmation window
should fill completely.
When the confirmation window is full, this
means you have applied enough blood.
Now you can move the test strip away from
the blood drop and wait for the meter
to count down from 5 to 1.
4. Read your result on the meter
Your blood glucose level appears on the display,
along with the unit of measure, and the date and
time of the test. Blood glucose results are
automatically stored in the meter’s memory.
27
Applying blood and reading results
Confirmation
Window
Not FullFull
(Example)
To Next Page
Loading...
