Applying blood and reading results
WARNING: If mg/dL does not appear with the test result, call Customer
Service. Use of the wrong unit of measure may cause you to misinterpret
your blood glucose level, and may lead to incorrect treatment.
Error messages
If you get an
ERROR message on your screen rather than a result, see
pages 50–58.
CAUTION: If you test at the low end of the operating range (50°F) and
your glucose is high (over 180 mg/dL), the reading on your meter may
be lower than your actual glucose. In this situation, repeat the test in a
warmer environment with a new test strip as soon as possible.
Unexpected test results
Refer to these cautions whenever your test results are lower than,
higher than, or not what you expect.
28
To Next Page
Loading...
