OneTouch Select User Manual

3
Setting up your system
Setting the meter language, date and time
You can change many of the settings that came pre-set with your meter.
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete steps 1 through 6 below to ensure your desired settings are
saved.
1. Turn the meter on, see page 2
2. Get to the SETTINGS screen
When using the meter for the first time, or
after changing the meter battery, you will
automatically start in the SETTINGS screen.
In other cases, from the MAIN MENU,
press or to select SETTINGS. To confirm
your selection, press .

OneTouch Select Specifications

General

Test Time	5 seconds
Sample Size	1 µL
Coding	No coding required
Measurement Range	20 to 600 mg/dL
Automatic Shutoff	2 minutes after last action
Operating Conditions	10 to 90% relative humidity