OneTouch Select User Manual

Setting up your system
The pre-set language, date, time and unit of
measure appear on the display. If they are
correct, press to return to the MAIN MENU.
If the language, date, or time are not correct,
select CHANGE and press .
The display now shows the LANGUAGE screen.
3. Choose a language
Now press or to highlight the language
of your choice. To confirm your selection,
press .
The display now shows the DATE AND TIME screen.
NOTE: If you select the wrong language, press and hold for three seconds
to turn the meter off. Then, turn the meter back on and re-start from step 1.
4

OneTouch Select Specifications

General

Test Time	5 seconds
Sample Size	1 µL
Coding	No coding required
Measurement Range	20 to 600 mg/dL
Automatic Shutoff	2 minutes after last action
Operating Conditions	10 to 90% relative humidity