OneTouch Ultra Plus Flex User Manual

64
3
Taking a test
When to do a control solution test
• When you open a new vial of test strips.
• If you suspect that the meter or test strips are not
working properly.
• If you have had repeated unexpected blood glucose
readings.
• If you drop or damage the meter.
Preparing your meter for a control solution
test
1. Insert a test strip to turn the meter on

OneTouch Ultra Plus Flex Specifications

General

Display Type	LCD
Connectivity	Bluetooth
Test Time	5 seconds
Sample Size	0.4 μL
Measurement Range	20 to 600 mg/dL
Memory	500 tests
Automatic Shutoff	Yes (after 2 minutes of inactivity)
Operating Conditions	10% to 90% RH
Storage Conditions	Humidity: 10 to 90% RH