OneTouch Verio Flex - First Time Setup; Hour will Flash; Minutes will Flash; Setting the Time

23
2
Setting up your system
First time setup
To turn your meter on, press and hold
until the start-
up screen appears. Once the device is on, release .
The meter will now automatically prompt you to set the
time and date. The SET icon will appear on the screen to
indicate that the meter has entered setup mode.
Setting the time
Hour will flash
• If the hour displayed
is correct, press
to
confirm.
• If the hour displayed is not
correct, press
or to
change the hour and press
to confirm.
Minutes will flash
• If the minutes displayed
is correct, press
to
confirm.
• If the minutes displayed is
not correct, press
or
to change the minutes and
press to confirm.