OneTouch Verio Flex - Page 78

76
5
Editing Your Settings
1. Review the pre-set low range limit displayed
• To accept the pre-set low
range limit, press
.
• To edit the pre-set
low range limit, press
or to change
the value between
3.3mmol/L-6.1mmol/L, and
then press .
2. Review the pre-set high range limit displayed
• To accept the pre-set high
range limit, press
.
• To edit the pre-set
high range limit, press
or to change
the value between
5.0mmol/L-16.7mmol/L,
and then press .
Your meter will exit settings mode and your last result
screen will appear.