11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com
F-3100 Flow Meter Manual 11/17 - 0670-9 Page 32
CAUTION
Do not cut the remote mount cable. The wires are not color coded.
Install remote cable through the
center strain relief as shown.
Connect the coil and electrode wires to
the appropriate terminals according to the
numbered tags on each wire.
3.3.4 Remote Mount Cable Wiring Instructions
Cable wires are
labeled with numbers
which correspond to
connection terminals on
the transmitter.
To Next Page
Loading...
