Do you have a question about the Onkyo ABX-100 and is the answer not in the manual?
Connect external audio devices via the LINE IN jack.
How to power the unit on and put it into standby mode.
Switch between iPod/iPhone and LINE input sources.
Steps to set up automated playback timers.
Set the unit to automatically turn off.
Solutions for power-related issues.
Troubleshooting sound issues and quality.
Resolving issues with iPod/iPhone connectivity and control.
Diagnosing and fixing timer operation problems.
Connect external audio devices via the LINE IN jack.
How to power the unit on and put it into standby mode.
Switch between iPod/iPhone and LINE input sources.
Steps to set up automated playback timers.
Set the unit to automatically turn off.
Solutions for power-related issues.
Troubleshooting sound issues and quality.
Resolving issues with iPod/iPhone connectivity and control.
Diagnosing and fixing timer operation problems.
| power supply | DC IN 15 V, 2 A |
|---|---|
| power consumption | 18 W |
| no-sound power consumption | 3.9 W |
| stand-by power consumption | 0.5 W |
| power output | 2ch × 10 W (6 Ω, 1 kHz, 1% THD) |
|---|---|
| total harmonic distortion | 1 % |
| input sensitivity and impedance | 1000 mV/ 15.6 kΩ |
| type | Full-Range bass reflex |
|---|---|
| unit | 6.4 cm (2-1/2") cone |
| magnetic shielding | magnetically shielded |
| dimensions | 430 × 131 × 143 mm |
|---|---|
| dimensions (inches) | 16-15/16 × 5-3/16 × 5-5/8 inches |
| weight | 2.4 kg |
Loading...