23EN
BASIC PLAYBACK
Playing Back a BD, DVD or a Disc with AVCHD files
BD-V
DVD-V
AVCHD
1
Press [ON/STANDBY I /Q].
2
Turn on the TV and select the
appropriate input on the TV to
which the unit is connected.
3
Press [OPEN/CLOSE A] to open the
disc tray.
4
Place the disc on the disc tray with
its label side facing up.
5
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load the disc.
6
Playback may start automatically.
If not, press [PLAY B].
Some discs may show a title or a disc menu. In
this case, refer to “Operations Using Title Menu,
Disc Menu, and Pop-up Menu” on page 24.
To pause playback:
Press [PAUSE F].
To return to the normal playback:
Press [PLAY B].
To stop playback:
Press [STOP C].
Refer to “Resume Playback” on page 24.
<Resume-On-Stop mode>
When you press [PLAY B] next time, the
playback will start from the point where it has
been stopped.
Note
• may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• BD/DVD/AVCHD menu varies depending on discs.
• If a disc contains AVCHD files, the playback of other
files which are in the same disc is not available.
Align the disc to the
disc tray guide.
To Next Page
Loading...
