Onkyo BD-SP809

EN
35
9.12 Switching Subtitles
Some video materials may have subtitles in one or more
languages. For commercially available discs, the supported
languages can be found on the disc case. Follow the steps
below to switch the subtitle language during playback.
1. During playback, press [SUBTITLE].
2. Use [Î / ï] to select “Primary”, “Secondary” or
“Style”, then press [ENTER].
“Primary” : Sets the subtitle for the primary
video.
“Secondary” : Sets the subtitle for the secondary
video.
“Style” : Sets style of the subtitle.
3. Use [Î / ï] to select your desired subtitle or style.
ENGSubtitle Primary
Off
Off
Secondary
Style
• Use [Í / Æ] to switch between current subtitle
setting and “Off”.
4. Press [RETURN] to exit.
1. During playback, press [SUBTITLE].
2. Use [Î / ï] to select your desired subtitle.
Subtitle
ENG
• Use [Í / Æ] to switch between current subtitle
setting and “Off”.
3. Press [RETURN] to exit.
D Note
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [POP UP MENU / MENU] to
display the disc menu or pop-up menu.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is no
subtitle for the secondary video
.
• You can also change the subtitle setting from the
play menu. Play menu can be called up by pressing
[MODE].
9.13 Switching Audio Soundtrack
When playing back video material recorded with two
or more soundtracks (these are often in different audio
languages or audio formats), you can switch them during
playback. For Blu-ray Disc™, available audio varies
depending on “BD Audio Mode” setting.
1. During playback, press [AUDIO].
2. Use [Î / ï] to select “Primary” or “Secondary”, then
press [ENTER].
“Primary” : Sets the audio for the primary
video.
“Secondary” : Sets the audio for the secondary
video.
3. Use [Î / ï] to select your desired audio stream
channel.
Dolby DENG Multi-ch
DTSENG
[Decoding Format] : Dolby D
Multi-ch
Audio Primary
Secondary
• For “Secondary”, use [Í / Æ] to switch between
current audio setting and “Off”.
4. Press [RETURN] to exit.
1. During playback, press [AUDIO].
2. Use [Î / ï] to select your desired audio stream
channel.
Dolby DENG Multi-ch
Audio
[Decoding Format] : Dolby D
• For audio CD, you can select following options.
“Stereo” : Both right and left channels are
active (stereo).
“L-ch” : Only left channel is active.
“R-ch” : Only right channel is active.
3. Press [RETURN] to exit.
E5WB0UDENBook.indb35E5WB0UDENBook.indb35 2011/06/0211:48:202011/06/0211:48:20