Onkyo BD-SP809

EN
48
ɶ Network Update
You can update the software by connecting the unit to the
Internet.
1. Follow steps 1 to 3 in “Disc / USB Update” on page 47.
2. Use [Î / ï] to select “Network”, then press
[ENTER].
3. Use [Í / Æ] to select “Yes”, then press [ENTER].
• This unit will then start checking for the latest
software version.
4. Confirmation message will appear. Select “Yes”, then
press [ENTER].
• The unit will start downloading the latest software
version.
5. When the download completes, confirmation message
will appear. Press [ENTER].
• The unit will start updating the software version.
• It may take a while to complete the updating.
6. After updating finishes, this unit will restart
automatically.
C Caution
• Please do not unplug the AC power cord or LAN
cable while executing the “Network”.
D Note
• In order to update the software via the Internet, you
must connect the unit to the Internet and set up
necessary settings.
• For the network connection, refer to “Connection to
the Network” on page 21.
• For the network setup, refer to “Network
Connection” on page 42.
• All settings will remain the same even if you update
the software version.
• The version of Netflix will also be updated if a newer
version of Netflix is available when updating the
software.
12.7 Initialize
[HOME ] Ȼ “Settings” Ȼ “Others” Ȼ “Initialize”
Menus to reset player settings, format USB flash drive,
local storage and clear network settings.
1. Use [Î / ï / Í / Æ] to select “Settings” in the home
menu, then press [ENTER].
2. Use [Î / ï] to select “Others”, then press [ENTER].
3. Use [Î / ï] to select “Initialize”, then press
[ENTER].
4. Use [Î / ï] to select the desired setting, then press
[ENTER].
“Reset Settings”:
All the settings except for the parental lock and
network settings will be reset to default.
“Reset Network Settings”:
Resets the network setting to the default.
“(Unit) Erase Saved BD-ROM Data”:
Clears the data saved for the BD-ROM contents, such as
BD-ROM game scores, on this player.
“(USB) Erase Saved BD-ROM Data” (Available
only when a USB flash drive is connected.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the USB flash
drive.
“Format USB” (Available only when a USB
flash drive is connected):
Initialize the USB flash drive.
5. Use [Í / Æ] to select “Yes”, then press [ENTER].
6. Confirmation message will appear. Press [ENTER] to
complete the setting.
7. Press [HOME
] to exit.
C Caution
• Do not remove the USB flash drive
while executing the “Format USB” or
“(USB) Erase Saved BD-ROM Data”. It will damage the
drive.
D Note
• “Format USB” or “(USB) Erase Saved BD-ROM Data”
is not available when a Blu-ray Disc™ is in the unit.
E5WB0UDENBook.indb48E5WB0UDENBook.indb48 2011/06/0211:48:232011/06/0211:48:23