En-16
Connecting a Portable Audio Device
The following diagram shows how to connect a portable audio device (e.g., MP3 player or MD player).
Connect the CBX-500/CBX-600UKD’s LINE IN jack on the rear panel to the portable audio device’s output jack.
Depending on the type of output jack on the portable audio device, you may need to purchase a suitable cable. The
CBX-500/CBX-600UKD’s LINE IN jack accepts a stereo miniplug.
Notes:
• Use a connecting cable that doesn’t have any attenuation resistors in it.
• If you connect a portable audio device’s headphone output to the CBX-500/CBX-600UKD’s LINE IN jack, turn down
the volume on the portable audio device before you connect it.
• If the CBX-500/CBX-600UKD seems quiet even with the volume turned up, try increasing the volume on the portable
audio device.
To Next Page
Loading...
Need help?
General
