En-45
Setting the Clock
If you have a CBX-500 North American model, use the
following procedure to set the clock. If you have a
CBX-500 European model or CBX-600UKD, the clock
is set automatically by the AccuClock function the very
first time the unit is plugged into a wall outlet (see
page 17).
If for some reason the clock cannot be set automatically,
use the following procedure to set it manually. Note that
when the clock is set manually, it will not be updated
automatically.
1
Press the [TIMER] button repeatedly until
“Clock” appears.
If you have a North American model, go to step 4.
2
Press [ENTER].
3
Use the Up/Down []/[] buttons to select
“ManualAdjust”.
Tip:
• If the AccuClock function is working, pressing the
[ENTER] button will set the clock based on the RDS
CT information (see page 46, step 6).
4
Press [ENTER].
• CBX-500 North American model
• CBX-500 European model and CBX-600UKD
5
Use the Up/Down []/[] buttons to select
the day of the week.
You can select: SUN, MON, TUE, WED, THU,
FRI, or SAT.
6
Press [ENTER].
• CBX-500 North American model
• CBX-500 European model and CBX-600UKD
Tip:
• To change the time format between 12-hour and 24-
hour, press the [DISPLAY] button.
7
Use the Up/Down []/[] buttons to enter
the current time.
Hold down the buttons to change the value quickly.
• CBX-500 North American model
• CBX-500 European model and CBX-600UKD
8
Press [ENTER].
The clock is set and the second dot starts flashing.
• CBX-500 North American model
• CBX-500 European model and CBX-600UKD
Setting the Clock
To Next Page
Loading...
Need help?
General
