En-52
Using the Timers—Continued
With the sleep timer, you can set the CBX-500/
CBX-600UKD so that it automatically turns off after a
specified period.
Press the [SLEEP] button repeatedly to select
the required sleep time.
With the [SLEEP] button, you can set the sleep time
from 90 to 10 minutes in 10 minute steps.
Use the Up/Down []/[] buttons to set the sleep time in
1 minute steps from 99 to 1.
When the sleep timer has been set, the SLEEP indicator
appears on the display, as shown. The sleep time appears
on the display for about 8 seconds, then the previous dis-
play reappears.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP]
button.
Note that if you press the [SLEEP] button while the sleep
time is being displayed, you’ll shorten the sleep time by
10 minutes.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button
repeatedly until “Sleep Off” appears.
Using the Sleep Timer
To Next Page
Loading...
Need help?
General
