5
En
Standard Accessories
*
Note
• In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operations are the
same regardless of color.
Installing the Batteries
Note
• If the remote control doesn’t work reliably, try replacing the
batteries.
• Don’t mix new and old batteries or different types of batteries.
• If you intend not to use the remote controller for a long time,
remove the batteries to prevent damage from leakage or
corrosion.
• Remove expired batteries as soon as possible to prevent damage
from leakage or corrosion.
Aiming the Remote Control
To use the remote control, point it at the DVD receiver’s
remote control sensor, as shown below.
FM antenna × 1
RCA video cable × 1
AC power cord × 1
Batteries (AAA, R03, UM-4) × 2
Remote control (RC-798S) × 1
Instruction manual (this document) × 1
Using Remote Control
Batteries
Remote control sensor
DVD receiver
Approx. 16 ft. (5 m)
To Next Page
Loading...
Need help?
General
