Onkyo DV-SP501 - Frame Advance;Frame Reverse; Looping a Section of a Disc

31
Playing discs —Continued
You can advance or back up a DVD disc frame-by-
frame. With Video CDs and VR format DVD-RWs, you
can only use frame advance.
The A-B Repeat function allows you to specify two
points (A and B) within a track (CD and Video CD) or
title (DVD) that form a loop which is played over and
over.
Note:
•You can’t use A-B Repeat with WMA/MP3 discs,
Video CDs in PBC 1mode, or unfinalized CD-R/RW
discs.
Frame advance/frame reverse
1
During playback, press (pause).
2
Press or to reverse
or advance a frame at a time.
3
To resume normal playback, press
(play).
Tips:
• The picture quality when using frame
reverse is not as good as frame
advance.
• Depending on the disc, normal play-
back may automatically resume when
a new chapter is reached.
• When changing direction with a DVD
disc, the picture may “move” in an
unexpected way. This is not a malfunc-
tion.
DIMMER
MENU
SETUP
TOP MENU
RETURN
AUDIO
TV CONTROL
TV/VIDEO CHANNEL
ON/
ANGLE SUBTITLE ZOOM
CLEAR
ENTER
789
0
/
Looping a section of a disc
1
During playback, press PLAY
MODE and select “A-B Repeat”
from the list of functions on the
left.
2
Press ENTER on “A (Start Point)”
to set the loop start point.
ON STANDBY
REPEAT
A
-
B
RANDOM
PLAY MODE
DISPLAY
DIMMER
MENU
SETUP
TOP MENU
RETURN
AUDIO
TV CONTROL
TV/VIDEO CHANNEL
ANGLE SUBTITLE ZOOM
CLEAR
OPEN/
CLOSE
ENTER
123
6
789
0
45
ENTER
///
PLAY MODE
A-B
PLAY MODE
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
ENTER
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
DV-SP501En.book Page 31 Tuesday, May 20, 2003 4:17 PM