Onkyo FR-155 - MD Mount Views and Display Messages; MD Mount Board Views; Display Message Explanations

FR-155
26
.
5. RF
4. VC
3. TE
2. IOP
1. I+3V
D101
IC101
CXA2523AR
IC201
CXP740010
IC121
CXD2662R
IC125
MSM51V4400D
CN101
CN105
IC152
BA5984
CN103
IC301
AK4522
CN102
CN104
CN106
CN110
MD MOUNT VIEW
MD Mount (side A)
MD Mount (side B)
(to pickup unit)
(to D-SW PC board)
(to MD over write head)
Loading motor
(to L-SW PC board)
Test point for MD adjustment
MESSAGES
The following table explains the messages that appear in the display.
Message
Meaning
Blank Disc A recordable MD without disc or track names is
inserted.
Cannot Copy An attempt was made to make a second digital
copy from a digitally dubbed MD
Cannot Edit You tr ied to edit a playback-only disc.
Cannot Rec You tr ied to record onto a playback-only disc.
Cannot Set
You tr ied to set a timer while another timer is
oper ating.
D. In Unlock The digital equipment (CD player, DAT, etc.) is not
connected properly, or else not operating proper
ly.
Disc Error The disc is abnormal (scratched or missing a TOC).
Disc Full The disc is full
Full You tr ied to enter a char acter over the maximum
character capacity while naming.
Impossible You tr ied to edit a disc using a function not
available due to some reason other than the MD
system limitation.
MD Writing The unit is writing the recorded or edited contents
to the MD.
Mecha Error An error occurred in the unit’s internal mechanism.
Memory Full You tried to store a 26th track or a 31st channel.
Name Full The naming capacity of the disc or unit has
reached its limit.
No Change The name has not been changed.
No Disc There is no disc in the unit.
No Track The inserted disc has a disc name but no tracks
Over In pause mode (when playing is paused),
(Fast Forward) was pressed to the end of the disc.
Protected The inserted disc is record-protected.
Recording You tried to switch to another source while
recording or perform a CD or tuner operation that
is disabled during recording.
Retry Error The recording attempt failed due to consecutive
disturbances from scratches on the MD or from
applied vibration.
Sorry You tr ied to (a) combine tracks that cannot be
combined, (b) divide a track at its beginning, or (c)
edit a disc using a function not available due to MD
system limitations.
Time Protect You tr ied to repeat double-speed dubbing using the
same CD.
TOC Error The reading of the disc or the recording onto the
disc failed.
Message
Meaning