Onkyo HT-R695

This update will enable streaming from Network Services /USB/
Bluetooth/Music server.
*Sampling rates of 44.1 kHz and 48 kHz are supported.(USB/Music
server)
*Onkyo Controller App is required to enjoy FireConnect.
*Note for Bluetooth pairing: If Bluetooth devices were previously
paired, you must pair the devices again after the Firmware update is
complete.
The 11/9/2016 update will address the following:
1. Minor bug fixes and performance updates.
The 8/31/2016 update will address the following:
1.DTS:X functionality*
2. Tidal and Deezer functionality
* After applying the update, users must recalibrate using AccuEQ.
The 4/19/2016 update will address the following:
• Several network functionality improvements, including network
connectivity with some dual-band wireless routers.
To check if your firmware is the latest version, go in to Setup -> Misc.
-> Firmware Update and check the version number. If any of the
numbers differ from the latest version available, please update your
unit.
Update via USB storage
Note: Please remove the wired/wireless connection before updating
through USB. Please prepare a USB storage device such as a USB
flash memory stick. You need at least 128 MB of available space to
update the firmware. Please unpack the ZIP file onto an empty USB
Stick that has been formatted with the FAT file system.
We hope you enjoy the improved functionality this update provides to
your AV Receiver.
Precautions for the Firmware Update