Onkyo HT-R960 Service Manual

TX-SR606
IC BLOCK DIAGRAMS AND TERMINAL DESCRIPTIONS-22
Q8001 : FLI30502 (LCD TV Controller with Worldwide Standard Sound Processor
and HDMI Receiver)-4/12
TERMINAL DESCRIPTION
Analog input port
I/O
AI
AG
AI
AP
AI
AP
AI
AG
AI
AG
AI
AG
AI
AG
AI
AG
AI
AG
AI
AP
AI
AO
Description
Negative analog input ‘B’ for channels 1 through 4. This acts as the return Path for the Sources
connected to channel-B Input. This has to be AC coupled using a series 57.6 resistor and 0.1 uF
Capacitor network to Analog Ground Plane on board.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Positive analog input for channel 3. The input has to be AC coupled using a series 20 resistor and
0.1uF Capacitor network.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog system
ground plane.
Positive analog input ‘A’ for channel 3. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog system
ground plane.
Positive analog input ‘B’ for channel 3. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Positive analog input ‘C’ for channel 3. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Negative analog input ‘C’ for channels 1 through 4. This acts as the return Path for the Sources
connected to channel-B Input. This has to be AC coupled using a series 57.6 resistor and 0.1 uF
Capacitor network to Analog Ground Plane on board.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Positive analog input for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Positive analog input ‘A’ for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Positive analog input ‘B’ for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Ground. Must be directly connected to the analog system ground plane on board.
Positive analog input ‘C’ for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Power(3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog system
ground plane.
Negative analog SV input for channels 1 through 4. This acts as the return Path for the Sources
connected to SV channel inputs. This has to be AC coupled using a series 57.6 resistor and 0.1uF
Capacitor network to Analog Ground Plane on board.
Analog VOUT signal. This is the Analog Video Output from the selectable Composite and
S-video Inputs. This can be amplified and be any video display device.
Pin Name
BN
GNDA
SV3P
VDDA
A3P
VDDA
B3P
GNDA
C3P
GNDA
CN
GNDA
SV4P
GNDA
A4P
GNDA
B4P
GNDA
C4P
VDDA
SVN
VOUT2
Pin #
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256

Onkyo HT-R960 Specifications

General

Brand	Onkyo
Model	HT-R960
Category	Home Theater System
Language	English