81
En
Making Macros
Each ACTIVITIES can store one macro, and each macro
can contain up to 32 commands.
Note
• Once you have taught a new macro commands, the original
macro will no longer work. If you retrieve it, you will have to
taught again.
Running Macros
Deleting Macros
1
While holding down RECEIVER, press and hold
down MY MOVIE, MY TV, or MY MUSIC until
MY MOVIE, MY TV, or MY MUSIC lights (about
3 seconds).
2
Press the buttons whose actions you want to pro-
gram into the macro in the order you want them
performed.
For the CD example above, you’d press the following
buttons: ON, TV/CD, 1.
Note
• MODE is invalid at macro making operation.
3
When you’ve finished, press ACTIVITIES again.
ACTIVITIES button flashes twice.
If you enter 32 commands, the process will finish
automatically.
Press MY MOVIE, MY TV, or MY MUSIC.
The commands in the macro are transmitted in the
order in which they were programmed. Keep the
remote controller pointed at the AV receiver until all
of the commands have been transmitted.
Macros can be run at any time, regardless of the cur-
rent remote controller mode.
RECEIVER
MY MOVIE,
MY TV,
MY MUSIC
ALL OFF
1
While holding down HOME, press and hold down
ALL OFF until ALL OFF lights (about 3 seconds).
2
Press ALL OFF again.
ALL OFF flashes twice.
Note
• It changes into Easy macro mode when the macro is
deleted (➔ 28).
• When you using Normal macro mode, you cannot use the
easy macro command including the change of the source
component.
To Next Page
Loading...
Need help?
General
