Onkyo HT-RC630 - Page 9

9
Step 3:
Playing Back
1
Playing the player and TV
z
To control the unit: The remote controller may be in the
remote mode that enables control of other devices. In the
state of remote mode, you will not be able to operate this
unit. When you operate the unit, operate it from back to (a
mode in which to operate this unit) RECEIVER mode by
pressing
2
RCV always.
1.
Turning the power on.
Press
1
z
RECEIVER on the remote controller to turn
the power on.
r You need to change the input setting of the TV to the
one for connection with this unit. Use the TV's remote
controller.
2.
Select the input of the unit and start playback on the
player or TV.
r Press
3
INPUT SELECTOR to which the desired
player has been assigned. Press TV/CD to play the
TV's sound. You can also use the input selector
buttons on the main unit.
r Input will automatically be selected if the TV or player
is CEC compliant and connected to the unit with
HDMI cable.
3.
Select the desired listening mode.
Press the
6
listening mode buttons to switch the
mode so that you can enjoy different listening modes.
For details about the listening modes, see "Listening
modes".
4.
Adjust the volume with
F
.
1
F
9
G
I
H
5
7
3
4
6
2
8
Remote controller parts name
1
z
RECEIVER button: Turns the unit on or into standby
mode.
2
RCV button: Switches the remote controller to the
mode for operating this unit.
3
REMOTE MODE/INPUT SELECTOR buttons: Switches
the input to be played.

¼
The input selector button NET has no effect on this unit, since the unit
does not have input selector “NET”.
4
Cursor buttons and ENTER button: Moves the cursor
and confirms the selection.
5
Q SETUP button: Displays the Quick Setup menu that
allows you to set the frequently used functions including
input selection and volume adjustment.
6
Listening mode buttons: Allows you to select the
listening mode.
7
DIMMER button: Switches the brightness of the display.
8
ZONE2 button: For use when the unit is connected with
a pre-main amplifier in a separate room and sound is
played there.
9
MUTING button: Temporarily mutes audio.
F
VOLUME buttons: Allows you to adjust the volume.
G
RETURN button: Returns the display to the previous
state.
H
HOME button: Displays the Home menu that allows you
to make advanced settings and use other functions.
I
DISPLAY button: Switches the information on the
display.
r The buttons other than
1
-
I
are for operating other
devices.