Onkyo LS3200 User Manual

12
En
Using the rubber stoppers for a more
stable platform
We recommend to use the supplied rubber
stoppers to achieve the best possible sound.
Attach the rubber stoppers to the four corners
of the bottom. The rubber stopper also provides
stability.
(Placing on the floor, etc.)
(Using the stand)
Attaching the stand
Insert the stand into the stand slit on the rear of
the front speaker.
To remove the stand, pull the stand out of the
speaker.
(Table top)
(Wall mounting)
Note
• Insert the stand until the border line of the surface
cannot be seen and push it all the way in to strike the
end.
Tip
• The front speaker can be mounted/placed both
horizontally and vertically.
Adjusting the angle
The angle of the speaker can be adjusted in two
ways depending on which stand slit you use.
Mounting/Placing the Front
Speakers
Thick rubber stoppers
Bottom of the SLM-302
Thin rubber stoppers
Bottom of the supplied stand
Border line
Slit for stand
Border line
Vertical settingHorizontal setting
(Using the upper slit) (Using the lower slit)
Table top
Wall mounting
Vertical settingHorizontal setting
Border
line
21
LS3200_En.book 12 ページ ２０１５年５月１３日 水曜日 午後５時５１分

Onkyo LS3200 Specifications

General

Brand	Onkyo
Model	LS3200
Category	Speaker System
Language	English