16
En
• Before connecting the power cord, connect all of
your speakers and TV.
• Turning on the unit may cause a momentary power
surge that might interfere with other electrical
equipment on the same circuit. If this is a problem,
plug the unit into a different branch circuit.
• Do not use the power cord other than the one
supplied with the unit. The supplied power cord is
designed exclusively for use with the unit and
should not be used with any other equipment.
• Never disconnect the power cord from the unit
while the other end is still plugged into a wall outlet.
Doing so may cause an electric shock. Always
disconnect the power cord from the wall outlet first,
and then the unit.
Connecting the Power cord
(LAP-302)
1
Connect the supplied AC adapter and
the power cord.
2
Insert the plug of the AC adapter into
DC IN.
3
Plug the AC adapter into an AC wall
outlet.
(SKW-B50)
1
Connect the supplied power cord for
subwoofer to AC INLET.
• The shape of the AC INLET differs depending
on the country.
2
Plug the power cord into an AC wall
outlet.
LS3200_En.book 16 ページ ２０１５年５月１３日 水曜日 午後５時５１分
To Next Page
Loading...
Need help?
General
