18
En
You can adjust the volume of subwoofer while
listening to an input source. Adjust the volume
by 1 step in the –10 to 10 range. The default is
0.
You can temporarily mute the output of the
controller.
Operating with the remote controller
Operating on the controller
• To cancel the muting, press on the remote
controller again or simultaneously press the
Volume
-
/+ buttons on the top panel or change the
volume level.
• Muting is automatically cancelled when the
controller is set to standby mode.
Since the Auto Power On function is set to on
by default, the controller will automatically
turn on and the TV selector is selected when
the controller receives the audio input from the
TV.
• If you don’t want the controller to be turned on
automatically when the TV is on, set the Auto
Power On function to off.
Adjusting the Subwoofer Level
1
Press SUBWOOFER +/
-
on the remote
controller.
Muting the controller
1
Press .
The output is muted and ON/STANDBY
LED flashes white.
1
Simultaneously press and hold the
Volume
-
/+ buttons on the top panel.
Pressing Muting button on your TV remote
controller sets both the controller and the TV
to muting mode. If you press and hold the
Muting button on your TV remote controller
for three seconds again, the controller
changes the setting. This is the function that
adjusts the controller’s setting to the TV’s
setting by switching the controller’s setting
when the controller’s setting and TV’s
setting of on/off are different.
Setting the Auto Power On
1
Turn off the controller.
2
Press and hold ÍON/STANDBY on the
top panel for three seconds.
The function is switched on/off and the
ON/STANDBY LED flashes amber.
When on: Twice
When off: Once
If you operate the controller with your TV
remote controller, set the Auto Power On
function to on. The controller cannot be
turned on by using Power On button on your
TV remote controller.
LS3200_En.book 18 ページ ２０１５年５月１３日 水曜日 午後５時５１分
To Next Page
Loading...
Need help?
General
