Onkyo NCP-302 User Manual

21
EN
∫ When Wi-Fi settings can't be made with
the app
If the volume of the device where the app is
installed is low or if sound effects are set to on, it
may not be possible to set properly. Try
increasing the volume or turn the sound effects
off.
∫ When you cannot connect to a network
via Wi-Fi
0 If this unit is connected by both an ethernet
cable and Wi-Fi to the access point, the
ethernet connection is prioritized. The
connection switches to Wi-Fi when you
disconnect the ethernet cable.
0 If the device being used (wireless LAN router,
etc.) is too far from the unit, or if there is an
obstacle between them, improve the Wi-Fi
performance by closing the distance between
them, for example.
0 Avoid using devices that generate
electromagnetic waves, such as a
microwave.

Onkyo NCP-302 Specifications

General

Product color	Black
Volume control	Rotary
Recommended usage	Universal
Multi-Room Streaming (MRS) support	Yes
Speaker type	2-way
Woofer diameter	77 mm
Tweeter diameter	26 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	- channels
RMS rated power	- W
Signal-to-Noise Ratio (SNR)	75 dB
Total Harmonic Distortion (THD)	0.5 %
Package depth	206 mm
Package width	426 mm
Package height	262 mm
Package volume	3800 cm³
Connectivity technology	Wired & Wireless
Cables included	AC, AUX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	10 W

Weight and Dimensions

Depth	106 mm
Width	320 mm
Height	172 mm
Weight	2600 g