Onkyo NCP-302 User Manual

EN
22
0 If your Wi-Fi network covers areas near
devices that generate electromagnetic
waves, keep the unit away from these areas.
∫ Firmware update does not complete
successfully
If you updated the unit from an app, if an error
code is displayed on the screen of the app or the
Wi-Fi indicator on the unit lights red, the update
did not complete successfully. Press ON/
STANDBY on the unit to turn the unit off and
then on again, then restart the app. The unit
restarts and the update starts again
automatically about a minute later. Alternatively,
if the update icon is displayed again in the app,
tap the icon to restart the update. The Wi-Fi
indicator on this unit flashes blue during the
update. When the indicator stops flashing and
lights blue, the update is complete, so press ON/
STANDBY to turn the unit off and then on again.
If the update cannot be restarted, check the
network connection.

Onkyo NCP-302 Specifications

General

Product color	Black
Volume control	Rotary
Recommended usage	Universal
Multi-Room Streaming (MRS) support	Yes
Speaker type	2-way
Woofer diameter	77 mm
Tweeter diameter	26 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	- channels
RMS rated power	- W
Signal-to-Noise Ratio (SNR)	75 dB
Total Harmonic Distortion (THD)	0.5 %
Package depth	206 mm
Package width	426 mm
Package height	262 mm
Package volume	3800 cm³
Connectivity technology	Wired & Wireless
Cables included	AC, AUX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	10 W

Weight and Dimensions

Depth	106 mm
Width	320 mm
Height	172 mm
Weight	2600 g