Onkyo NS-6130

7
E
N
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Connections with an amplifier
Install
a
a
1
2
You can play the audio from network features such as
internet radio through speaker systems connected to pre-
main amplifiers or AV receivers. Connect to suit the input
jacks on your amplifier.
Connecting with an analog audio cable
The signal is converted to analog in the D/A converter of
this unit and then output to the pre-main amplifier. Connect
the LINE IN jacks on a pre-main amplifier with the included
analog audio cable to the AUDIO OUTPUT ANALOG jack
on this unit.
Connecting with a digital coaxial cable
The signal is converted to analog in the D/A converter of
the pre-main amplifier. Connect the COAXIAL IN jacks on a
pre-main amplifier with a digital coaxial cable to the AUDIO
1
2
NS-6130
a
b
OR
Integrated amplifier, AV receiver, etc.
a Analog audio cable, b Digital coaxial cable