Onkyo T3

8 EN
4 Select [Onkyo T3] displayed on
your first Bluetooth device to start
reconnection.
» The two Bluetooth devices are
connected to the speaker at the
same time.
» If you press and hold
again for
two seconds, the two devices are
disconnected, and the speaker is
ready to pair with a new device.
Tip
•
For a paired Bluetooth device, this speaker tries to
reconnect with it once it is detected. If it fails, you
just need to select [Onkyo T3] on your device to
start reconnection.
Play from Bluetooth device
Note
•
If there is an incoming call on the connected mobile
phone, music play pauses.
After successful Bluetooth connection, play
audio on any connected Bluetooth device.
» Audio streams from your Bluetooth
device to the speaker.
• To go to the previous track or the
beginning of the current track
(depending on the setting of your
mobile devices), press
twice.
• To go to the next track, press
twice.
• To pause or resume play, press
.
• To increase or decrease volume, press
+/-.
Control your phone call
After Bluetooth connection, you can control
an incoming call with this speaker.
Button Function
Press to answer an incoming call.
During a call, press to end the
current phone call.
Note
•
You can talk through the microphone of the
speaker.
• Music play pauses when there is an incoming call,
and resumes when your phone call ends.