Onkyo T3

9EN
5 Other features
Charge your mobile devices
You can charge your mobile devices through
the OUT [PHONE] socket.
Note
•
The USB socket is for charging only.
• Do not connect the IN socket and the OUT [PHONE]
socket with the same cable.
• Stop music play while charging your mobile
devices.
1 Turn on the speaker.
2 Connect to your mobile device with the
USB cable.
» Once the device is recognized, the
charging starts.
» During charging, the speaker turns
o automatically.
Enable/disable voice
prompt
Press and hold for two seconds to
enable or disable the voice prompt.
» When the voice prompt is enabled, the
speaker will speak in English.
» When the voice prompt is disabled, the
speaker will change to the tone mode.
Use the detachable case
A detachable case is provided to place
the speaker on a flat surface. Follow the
illustration to install the case.
Reset the speaker
If the system works abnormally, reset the
speaker to factory default settings.
1 Turn on the speaker.
2 Press and together for five
seconds.
» All settings are reset to factory
default.