Onkyo T3

11EN
7 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, contact Onkyo service center.
When you contact Onkyo, make sure that the
device is nearby and the model number and
serial number are available.
General
No power
• Recharge the built-in battery.
No sound
• Adjust volume on the speaker or the
Bluetooth-connected device.
• Make sure that your Bluetooth device is
within the eective operational range.
No response from the speaker
• Restart the speaker.
Cannot charge mobile devices
• Make sure that the built-in battery still
has power.
• Connect to the mobile phone correctly.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
• The Bluetooth reception is poor. Move
the device closer to this speaker or
remove any obstacle between them.
Cannot connect with the device.
• The Bluetooth function of the device is
not enabled. Refer to the user manual
of the device for how to enable the
function.
• The speaker is not in pairing mode.
Press and hold
for two seconds until
the power/Bluetooth indicator flashes
blue quickly, and then try again.
The paired device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move
the device closer to this product or
remove any obstacle between them.
• For some devices, Bluetooth connection
may be deactivated automatically as
a power-saving feature. This does
not indicate any malfunction of this
speaker.