Onkyo TA-2130

Specifications
A
aa
a
a
Track System:
Erasing System:
Tape Speed:
Wow and Flutter:
Frequency Response:
S/N Ratio:
Input Jacks:
Outputs:
Motors:
Heads:
Power Supply Rating:
Power Consumption:
Dimensions:
Weight:
4-tracks, 2-channels
AC erase
4.8 cm/sec (1-7/8 i.p.s.) |
0.06% (WRMS)
20—15,000Hz (Normal)
(80—14,000Hz +3dB)
20—16,000Hz (High)
(80—15,000Hz +3dB)
20—17,000Hz (Metal)
(80—16,000Hz +3dB)
Dolby NR off: 58dB (metal position tape)
Anoise reduction of 10dB above 5kHz
and 5dB at 1kHz is possible with Dolby B
NR. A noise reduction of 20dB at 5kHz is
possible with Dolby C NR.
Microphone jacks: 2
Input sensitivity: 0.6mV/600 ohms
Input impedance: 2.7 kohms
Line IN: 2
Input sensitivity: 60mV
Input impedance: 50 kohms
DIN jack: 4
Input sensitivity: 0.1mV/1 kohms
input impedance: 2.7 kohms
Headphone jack: 1
Optimum load impedance:
8 to 200 ohms
Line OUT: 2
Standard output level: 500mV (0dB)
Optimum load impedance: over
50 kohms
DIN out jack: 1
Standard output level: 500mV
Optimum load impedance:
over 50 koms
DC servo motor x 1; DC motor x 4
REC/PB: Special Hard Permalloy x 1;
Erase head: Ferrite x 1
U.K. and Australian models:
AC 240V, 50Hz
European models (except U.K.):
AC 220V, 50Hz
U.S.A, and Canadian models:
AC 120V, 60Hz
Worldwide models:
AC 120V and 220V switchable, 50 / 60Hz
18 watts
435(W) x 112(H) x 262(D)mm
(17-1/8" x 4-3/8" x 10-3/8")
4.1 kg. (9.1 Ibs.)
Specifications
and
external
appearance
are
subject
to
change
without
notice
because
of
product
improvements.
=g=.