EasyManuals Logo

Onkyo TX-8250 Service Bulletin

Onkyo TX-8250
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE BULLETIN
NO:04003
2004/04/21
MODELS : TX-SR502/502E/8250/HT-R520
SUBJECT : The countermeasure against IC oscillation.
Symptom:
TX-SR502's output sometimes has a hum with signals after power on within
few minutes.
When selector or DSP mode is switched to another at this moment, the protect
program starts.
Cause:
Oscillatation of IC regulator.
Procedure for service:
To exchange an electrolytic capacitor with that of 330uF for C6412 in NADG-
8230.
Circuit No. Before
change
After change
Parts No. Description Parts No. Description
C6412 394741007 ELECT C
CE04W16V10M
394743317 ELECT C
CE04W16V330M
Marking: No change
Application:
TX-SR502(B) MDD, MDC
HT-R520(B) MDD, MDC #1-
HT-R520(S) MDD, MDC #1-

Other manuals for Onkyo TX-8250

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-8250 and is the answer not in the manual?

Onkyo TX-8250 Specifications

General IconGeneral
TypeStereo Receiver
Channels2
THD+N (Total Harmonic Distortion + Noise)0.08%
Frequency Response10 Hz - 100 kHz
Signal-to-Noise Ratio106 dB
Speaker Impedance4 - 16 ohms
Phono InputYes (MM)
Speaker OutputsA/B
EthernetYes
Wi-FiNo
FM/AM TunerYes
Standby Power Consumption0.15 W
Digital Audio InputsOptical (2), Coaxial (1)
Analog Audio InputsRCA (4)
Audio Outputs1 Subwoofer Pre-Out
USBYes
BluetoothYes
Streaming ServicesTidal, Deezer, Spotify
Dimensions (W x H x D)435 x 328 mm

Related product manuals