Do you have a question about the Onkyo TX-8511 and is the answer not in the manual?
power output per channel | 100 Watts |
---|---|
dynamic power output at 2 ohms | 2 X 170 Watts |
dynamic power output at 4 ohms | 2 X 135 Watts |
dynamic power output at 8 ohms | 2 X 140 Watts |
power supply voltage | AC 120 V |
---|---|
power supply frequency | 60 Hz |
power consumption | 2.8 A |
dimensions (W x H x D) | 435 X 150 X 322 mm |
---|---|
dimensions in inches | 17-1/8" x 5-7/8” X 12-11/16" |
weight | 8.9 kg |
power output at 4 ohms | 2 X 100 Watts |
---|---|
tuning range | 522 to 1, 611 kHz |
dynamic power output at 4 ohms | 2 X 120 Watts |
power supply voltage | AC 230 V |
---|---|
power supply frequency | 50 Hz |
power consumption | 220 W |
tuning range | 87.50 to 108.00 MHz |
---|---|
usable sensitivity mono | 11.2 dBf, 1.0 µV |
capture ratio | 1.5 dB |
power output at 4 ohms | 2 X 130 Watts |
---|
power supply voltage | AC 220-230/120 V switchable |
---|---|
power supply frequency | 50/60 Hz |
tuning range | 87.50 to 108.00 MHz |
---|---|
usable sensitivity mono | 11.2 dBf, 1.0 µV |
capture ratio | 1.5 dB |
dynamic power output at 2 ohms | 2 X 143 Watts |
---|---|
dynamic power output at 4 ohms | 2 X 120 Watts |
dynamic power output at 8 ohms | 2 X 75 Watts |
tuning range | 87.50 to 108.00 MHz |
---|---|
usable sensitivity mono | 11.2 dBf, 1.0 µV |
capture ratio | 1.5 dB |
Details all buttons, knobs, and jacks on the front panel of the receiver.
Explains the meaning of various indicators and displays on the unit.
Lists and explains the functions of buttons on the remote control.
Provides step-by-step instructions for connecting speaker wires and speakers.
Explains how to turn the unit on/off using front panel switches and remote.
Guides on selecting sources, speakers, and adjusting volume and tone.
Guides on tuning FM/AM stations manually or by entering frequencies directly.
Guides on storing up to 30 AM/FM stations in memory groups.
Instructions for recalling stored stations and removing them from memory.
Step-by-step guide for entering station names using front panel controls.
Step-by-step guide for recording audio from different sources to a tape deck.
Steps for setting up multi-room control with Onkyo components using RI jacks.
Guides for connecting components without RI jacks using emitters for remote control.
Specific instructions for multi-room setup for models outside the US and Canada.
Steps to prepare the main unit for remote operation from another room.
How to select sources and adjust volume from the sub-room using the remote.
A table listing common problems, their causes, and solutions for the receiver.
Detailed technical specifications for the amplifier and tuner sections.