Onkyo TX-8511

Receiving stations
pSelectItK
First, select the tuner as the source by
pressing the AM or FM input selector but¬
ton on the main unit or TUNER input
selector button on the remote control.
Main unit
1. Press the GROUP button to select the
desired group.
2. Input the memory number you wish
to receive by using the number but¬
tons.
or
Press the SCAN button.
Each station stored in the group chosen
in step 1 will be received for 5 second.s.
When the station that you want is
found, press the SCAN button again
and scanning will stop.
Remote control
1. Press the GROUP button and choose
the group.
2. Press the PRESET •< or ► button.
After the last number of GROUP C is
reached, .scanning will restart at GROUP
A.
□
I' =
. a a a
..o
lLs__i/ "”1—r
mJI
®
i 1 1 1 1 1 1
3 0 0 0
I . _
v_y
2
fWMlU » fMO <
ft sunco
UOOE. MOUI
ON
STfRfO
wnni
r i''i
ort r
in
/
■ ZB
1 1 1
D a. L
.1
c.
_ y 't.
1. Select the station that you want to
cancel as explained in the previous
section.
2. Press tlie FM .MUTE/MODE button
while holding down the MEMORY
button.
” will be shown on the display.
• Once the prc.sei station has been can¬
celled, the memory location can be used
to store another .station.
17