Need help?Do you have a question about the Onkyo TX-8050S and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Channels | 2 |
| Input Sensitivity | 200 mV/47 kOhms (Line) |
| Signal-to-Noise Ratio (Line, IHF-A) | 106 dB |
| Speaker Impedance | 4 - 16 ohms |
| Speaker Impedance Range | 4 - 16 ohms |
| Connectivity | Ethernet, USB, Bluetooth |
| Dimensions (WxHxD) | 17.1 x 5.5 x 14.9 in |
| Weight | 22.5 lbs |
| Tuner Section | FM/AM Tuner |
| Frequency Response | 10 Hz - 100 kHz |
| Frequency Response (Direct Mode) | 10 Hz - 100 kHz |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity and Impedance | 200 mV / 47 kΩ |
| Signal-to-Noise Ratio | 106 dB |
| Audio Inputs | 6 Analog |
| Audio Outputs | 2 Analog |
| FM Sensitivity | 1.0 µV |
| AM Sensitivity | 300 µV |
| Audio Features | Direct Mode, Tone Control |
| Bluetooth | Yes |
| USB | Yes |
| Power Output | 80 W/Ch (8 Ohms, 20 Hz–20 kHz, 0.08% THD, 2 Channels Driven, FTC) |
| Signal-to-Noise Ratio (SNR) | 106dB (Line, IHF-A) |
| Network Features | DLNA Certified, Internet Radio Connectivity (vTuner) |
Critical components identified by mark are essential for fire and shock prevention. Replace with specified parts.
Schematic illustrating the audio signal flow and processing.
Schematic illustrating the video signal flow and processing.
Schematic detailing the power supply and transformer circuitry.
Schematic showing how audio signals are received and processed.
Schematic detailing the power amplification stage.
Schematic for the main control, digital-to-analog conversion, and digital interfaces.
To Next Page
